HYPREX

Hello! Welcome to HYPREX(Shanghai) Hydraulic & Electrical manufacture co.ltd !

Service hotline

021-66870277

用手机扫描二维码关闭
二维码

Frameless screw type

Release time:2020-06-09 13:51

Frameless screw type

This is a type of screw structure. The main engine is mainly composed of integral cylinder, head, screw cover, vent valve, etc. Its main stressed parts are composed of cylinder and screw cover. The screw cover is divided into full thread and clamp thread. The screw structure of the clamp can quickly open and close the screw cover, as long as the screw cover is rotated by 30 ° angle, at the same time, the threaded part of the barrel and the screw cover will not be worn. The material of cylinder and screw cover is high-strength alloy steel. During the operation, unscrew the upper screw end cover, install the sample, and then screw the screw end cover on and tighten it. Start it with the button. Under the control of the electric hydraulic system, start to pressurize. When the pressure holding time is reached, start to release the pressure. After the pressure is released, open the end cover and take out the sample. The system equipment is more compact because of no frame. It has the characteristics of simple structure, small volume and convenient maintenance. It is suitable for the upstairs laboratory. The opening of the head requires manual operation.



Product features:
·Both ends of the ultra-high pressure vessel are constrained by screw thread (screw type), which saves the frame structure, manufacturing cost and low price.
·Ultra high pressure vessel is made of ultra-high strength stainless steel double-layer sleeve or steel wire winding, which has excellent corrosion resistance and greatly improves the fatigue life of ultra-high pressure vessel.
·The pressurized medium can be used not only in food industry and biopharmaceutical industry, but also in powder metallurgy, ceramics and other industries.
·Equipped with computer PLC control software, it can realize high automation.

Specifications and technical parameters are as follows:

Small or experimental frame less screw type isostatic press
No
Model
Maximum pressure(MPa)
Effective volume(L)
Vessel diameter(mm)
Motor power(kw)
Length × width × height(mm)
Weight(kg)
1
LFIP60 - 600/0.6
600
0.6
60
1.1
820×600×1000
240
2
LFIP70 -500/0.8
500
0.8
70
1.1
570×465×950
205
3
LFIP80 - 600/2
600
2
80
2.2
700×650×1300
550
4
LFIP100 - 600/3
600
3
100
3.0
750×700×1300
680


Medium and large-scale integrated direct compression isostatic press
No
Maximum working pressure
Volume
Medium
1
600MPa
10L
Water, oil
2
600MPa
15L
Water, oil
3
600MPa
20L
Water, oil
4
600MPa
30L
Water, oil
5
600MPa
50L
Water, oil
6
600MPa
80L
Water, oil
7
600MPa
100L
Water, oil
8
600MPa
120L
Water, oil
9
600MPa
150L
Water, oil
10
600MPa
200L
Water, oil


Scan the qrcode to reading this article on your phone

Copyright© HYPREX    沪ICP备11017988号-1    Technical Support: 仙人球建站